Delayed Fracture of a Laminated Viscoelastic Plate with a Through Crack under a Time-Dependent Load

The delayed fracture of a viscoelastic plate with a rectilinear mode I crack under a time-dependent load is studied. The plate is made of a laminated composite with an isotropic elastic reinforcing component and a viscoelastic matrix. The composite is modeled by an orthotropic homogeneous linearly viscoelastic medium with some averaged characteristics. To determine the viscoelastic characteristics of the composite, the Volterra principle and the method of continued fractions are used. The study is made within the framework of the theory of delayed fracture for viscoelastic bodies.     

Modulated Taylor-Couette Flow: Onset of Spiral Modes

The linear stability of the flow between concentric cylinders, with the inner cylinder rotating at a constant angular velocity and the outer cylinder with an angular velocity varying harmonically about a zero mean, is addressed. The bifurcations of the base state are analyzed using Floquet theory, paying particular attention to non-axisymmetric bifurcations which are dominant in significant regions of parameter space. In these regions the spiral modes of the unforced system become parametrically excited and dominant. This is typical behavior of parametrically forced extended systems, where some modes are stabilized, but others are simultaneously excited. The flow structure of the bifurcated states are examined in detail, paying particular attention to the dynamic implications of their symmetries, and in particular how and when subsequent period doublings are inhibited. Received 5 November 2001 and accepted 29 March 2002 Published online: 2 October 2002 RID="*" ID="*" This work was supported by NSF Grants INT-9732637 and CTS-9908599 (U.S.A.) and MCYT Grants PB97-0685 and BFM2001-2350 (Spain). Communicated by H.J.S. Fernando     

爆炸金属管绝热剪切断裂的细观研究

介绍了正火及调质后45号钢、TC4钛合金和钨合金四种金属管在内部高能炸药加载下,破片宏观剪切断口的细观断裂形貌;观察到这四种金属管不同的细观剪切断裂机制。根据金相研究及物理分析表明,金属材料的热导率越低,晶粒越细,则越容易产生绝热剪切,生成相变带。     

A new micromechanical formulation of martensite kinetics driven by temperature and/or stress

Summary Martensitic transformation behavior of alloys is studied under the arbitrary action of a thermal and/or a triaxial mechanical load-stress state by solving a transformation kinetic equation presented recently by the same authors. Numerical and analytical solutions reveal that the transformation behavior is almost path-independent. Lines of constant volume fraction of martensite are nearly parallel in the stress-temperature plane. Some new analytical formulae for martensitic transformation kinetics are presented.

---

Eine neue mikromechanische Formulierung der Martensit-Kinetik unter Temperatur- und/order Spannungsbelastung

Übersicht Es wird das Verhalten der martensitischen Umwandlung von Legierungen unter beliebiger thermischer und/oder dreiachsiger mechanischer Spannungsbelastung untersucht, indem eine neue Gleichung der Umwandlungskinetik gelöst wird. Diese Gleichung wurde vor kurzem von denselben Autoren vorgestellt. Die numerischen und die analytischen Lösungen zeigen, daß das Transformationsverhalten nahezu pfadunabhängig ist. Die Linien gleicher Volumsfraktion von Martensit sind nahezu parallel im Spannungs-Temperatur-Diagramm. Es werden auch einige neue analytische Formeln für die Umwandlungskinetik von Martensit präsentiert.

     

Creeping flow of viscoplastic materials through a planar expansion followed by a contraction

In this work, the creeping flow of a viscoplastic fluid through a planar channel with an expansion followed by a contraction is analyzed numerically. The solution of the conservation equations of mass and momentum is obtained via the finite volume method. In order to model the non-Newtonian behavior of the fluid, it was used the generalized Newtonian fluid constitutive equation. The viscosity function was the one proposed by Souza Mendes and Dutra [Souza Mendes, P.R., Dutra, E.S.S., 2004. Viscosity function for yield-stress liquids. Appl. Rheol. 14, 296–302]. The yielded and unyielded regions are obtained for several combinations of rheological parameters. The influence of these parameters on pressure drop through the cavity is also obtained and analyzed.     

Fourier Transform in Bounded Domains

The functional analysis, the concept of distributionsu in the sense of Schwartz [7] andtheir extension given by Gelfand and Shilov [5]to ultradistributions u ,enables us to find by the means of the Fourier transform a secondlanguage to characterize physical behaviour. Almost any expressionwith physical meaning can be transformed, even if it isformulated in domains with complicated boundaries and evenif it is not integrable.Numerical procedures in the transformed space can bedeveloped in analogy to those well known in engineeringmechanics like the methods of Finite or BoundaryElements (FEM or BEM). Basis of the approaches presentedhere is the analytical representation of characteristicdistribution of a domain and the theorem of Parseval whichstates the invariance of energy in respect to thetransformation. In addition, the concept of thecharacteristic distribution leads to a very simplederivation of the Green-Gauss formulas fundamental for theBoundary or Finite Elements (e.g. [6]).     

Effect of an inhibitor on high-speed turbulent flames and the transition to detonation

The influence of an inhibitor (CF₃Br or Halon 1301) on the propagation of high-speed turbulent flames, quasi-detonations and the transition to detonation has been investigated for methane-air, propane-air and acetylene-air mixtures. The experiments are carried out in a 13 m tube (15 cm diameter) filled with regularly spaced orifice plates (blockage ratio of 0.39) to ensure rapid flame acceleration. In all cases, the addition of the inhibitor reduces the turbulent flame velocity and extinguishes the flame with sufficient inhibitor concentration (2.7% and 7.5% for methane-air and propane-air, respectively). For acetylene-air mixtures, the quasi-detonation speed is progressively reduced with increasing inhibitor concentration and eventually causes the failure of the quasi-detonation and transition back to a fast turbulent flame. The inhibitor also narrows the propagation limits in all cases. To elucidate the inhibition mechanism, detailed modelling of both the turbulent flame structure as well as the chemical kinetics are required.     

Nonlinear Capillary-Gravity Waves on the Charged Surface of an Ideal Fluid

A second-order asymptotic expression for the profile of a capillary-gravity wave traveling over the charged surface of an ideal incompressible fluid is calculated analytically. Two types of steady-state profiles of nonlinear periodic capillary-gravity waves are found. For a certain fixed dimensionless surface charge the shape of the tops of the nonlinear waves changes: from blunt to pointed for short waves and from pointed to blunt for long waves.     

Transient oscillatory conjugate natural convection in a tall water cavity

A two-dimensional numerical simulation was conducted to investigate the effects of the heat capacity of the heated wall on the transient oscillatory convection in a tall cavity. Results were particularly obtained for water (Pr=6) in a tall cavity (A=6) with constant-heat-flux heating on one side and isothermal cooling on the opposing side. Significant wall heat capacity effects were found. Specifically, a heated wall of finite heat capacity can slow down the flow evolution process to steady state at low Rayleigh number and damp the flow oscillation during the initial developing period at high Rayleigh number. In periodic flow atRa* _H =4.4×10¹⁰ the wall heat capacity significantly reduces the amplitude of the temperature oscillation. A quasi-periodic flow atRa* _H =4.8×10¹⁰ was found to become periodic when the wall heat capacity was included. The wall heat capacity does not shown noticeable effect when the flow is chaotic forRa* _H =6.0×10¹⁰.In einer zweidimensionalen numerischen Simulationsrechnung wurde der Einfluß der Wärmekapazität einer beheizten Wand auf die nichtstationäre oszillatorische Konvektion in einem großen Behälter untersucht. Die Resultate beziehen sich speziell auf Wasser (Pr=6), einen tiefen Behälter (H/W=6) und konstanten Wärmezufluß auf der einen und isotherme Kühlung auf der anderen Wandseite. Es traten signifikante Effekte in Abhängigkeit von der Wandwärmekapazität auf. Insbesondere vermag eine beheizte Wand begrenzter Wärmekapazität bei niedrigen Rayleigh-Zahlen die Entwicklung des Strömungsprozesses bis zum Stationärzustand abzubremsen und bei hohen Rayleigh-Zahlen die Strömungsoszillationen während der Einschwingphase zu dämpfen. Bei periodischem Strömungszustand undRa* _H =4,4·10¹⁰ verringert die Wandkapazität die Amplitude der Temperaturschwingung beträchtlich. Es zeigte sich ferner, daß ein quasiperiodischer Strömungszustand beiRa* _H =4,8·10¹⁰ periodisch wird, wenn die Wandkapazität Einfluß nimmt. Letztere hatte keine nachweisbaren Wirkungen bei chaotischem Strömungszustand mitRa* _H =6,0·10¹⁰.     

A Second-Order Solution of Saint-Venant's Problem for a Piezoelectric Circular Bar Using Signorini's Perturbation Method

We study electromechanical deformations of a homogeneous transversely isotropic piezoelectric prismatic circular bar loaded only at the end faces. The constitutive relations for the material of the bar are taken to be quadratic in the displacement gradients and the electric field. It is found that the two end faces of the bar when twisted with no electric charge applied to them will exhibit a difference in the electric potential. Thus the piezoelectric cylinder could be used to measure the torque or the angular twist. This revised version was published online in August 2006 with corrections to the Cover Date.